|Home>> Products>> Equipment and jointing systems>> Conveyor and transmission belts jointing systems|
|Conveyor and process belts
Jointing systemCHIORINO offers a various choice of jointing systems, designed to match all the application needs. Here below we summarize the types of joints that can be selected to make CHIORINO belts endless:
(1): OVERLAP joints
This system is applicable to thermoplastic polyurethane belts.
(2,3,4): FINGER joints
Traditional splicing method that guarantees thickness and alignment evenness:
MICRO Z: Fast joint for conveyor and transmission belts.
SINGLE Z: It offers the maximum of flexibility. Ideal on fixed knife edges. Seam sealing foil can be used to increase strength and for heavy applications.
DOUBLE Z: It provides high strength and can be used in alternative to single Z.
Special method for polyamide transmission belts and some conveyor belts for special applications as alternative to the traditional finger joints.
Special method for some belts and for special applications as alternative to the traditional finger joints.
(7): PLASTIC FASTENER
Non metallic fastener made of polyester fabric and spiralace. It has a high resistance to chemicals, guarantees flexibility and a short replacement time. It is FDA approved. It is suitable for over 16 mm diameter pulleys and in particular in those applications involving X-Ray scanners or metal detectors.
(8,9,10,11): METAL FASTENER
Mechanical fasteners suitable in those situations where ease and speed of fitting is required. They are available both in galvanized and stainless steel, in the following types:
M/G: Suitable for every belt type, in particular for airport systems, for food industry and for textile industry.
M/M: Suitable for every belt type and application. They do not need equipment for their application.
M/SL: Suitable for every belt type and application. They do not need equipment for their application.
M/SW: Suitable for belts thicker than 2 mm. They guarantee superior strength. They are in particular used in the agricultural industry.
1 - The jointing systems described above must be related to the belt type and the working conditions.
2 - The Technical Support is available, even on site, to provide the necessary instructions in order to correctly join CHIORINO belts.
©Chiorino Singapore 2012. All rights reserved.